CCNA 200-301 Official Cert Guide
(pearson-200-301)
/ ISBN: 9781644591437
This course includes
Lessons
TestPrep
pearson-200-301_pro.png?1591679340
CCNA 200-301 Official Cert Guide
Prepare for the Cisco CCNA certification exam with the CCNA 200-301 Official Cert Guide. The CCNA course covers the CCNA 200-301 exam objectives and teaches you how to work with network fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation and programmability. The course has the best CCNA exam practice questions, flashcards, and other interactive resources that will prepare you for the CCNA exam.
The Cisco CCNA 200-301 certification enables you to demonstrate your knowledge of IT fundamentals. The CCNA exam covers the foundational networking knowledge that you’ll need to get your career in networking. The CCNA 220-301 exam validates that the candidate has the knowledge and skills required to compare TCP to UDP, configure and verify IPv4 addressing and subnetting, configure and verify IPv6 addressing and prefix.
Lessons
-
66+ Lessons
-
306+ Quizzes
-
522+ Flashcards
-
542+ Glossary of terms
TestPrep
-
102+ Pre Assessment Questions
-
2+ Full Length Tests
-
102+ Post Assessment Questions
-
204+ Practice Test Questions
Video Lessons
-
20+ Videos
-
02:45+ Hours
- About Cisco Certifications and CCNA
- Course Organization, Lessons, and Appendixes
- Perspectives on Networking
- TCP/IP Networking Model
- Data Encapsulation Terminology
- Review All the Key Topics
- An Overview of LANs
- Building Physical Ethernet LANs with UTP
- Building Physical Ethernet LANs with Fiber
- Sending Data in Ethernet Networks
- Review All the Key Topics
- Wide-Area Networks
- IP Routing
- Other Network Layer Features
- Review All the Key Topics
- Accessing the Cisco Catalyst Switch CLI
- Configuring Cisco IOS Software
- Command References
- Review All the Key Topics
- LAN Switching Concepts
- Verifying and Analyzing Ethernet Switching
- Command References
- Review All the Key Topics
- Securing the Switch CLI
- Enabling IPv4 for Remote Access
- Miscellaneous Settings Useful in the Lab
- Command References
- Review All the Key Topics
- Configuring Switch Interfaces
- Analyzing Switch Interface Status and Statistics
- Command References
- Review All the Key Topics
- Virtual LAN Concepts
- VLAN and VLAN Trunking Configuration and Verification
- Troubleshooting VLANs and VLAN Trunks
- Command References
- Review All the Key Topics
- STP and RSTP Basics
- Details Specific to STP (and Not RSTP)
- Rapid STP Concepts
- Review All the Key Topics
- Understanding RSTP Through Configuration
- Configuring Layer 2 EtherChannel
- Command References
- Review All the Key Topics
- Introduction to Subnetting
- Analyze Subnetting and Addressing Needs
- Make Design Choices
- Plan the Implementation
- Review All the Key Topics
- Classful Network Concepts
- Practice with Classful Networks
- Review All the Key Topics
- Subnet Mask Conversion
- Identifying Subnet Design Choices Using Masks
- Review All the Key Topics
- Defining a Subnet
- Analyzing Existing Subnets: Binary
- Analyzing Existing Subnets: Decimal
- Practice Analyzing Existing Subnets
- Review All the Key Topics
- Installing Cisco Routers
- Enabling IPv4 Support on Cisco Router Interfaces
- Command References
- Review All the Key Topics
- IP Routing
- Configuring IP Addresses and Connected Routes
- Configuring Static Routes
- IP Forwarding with the Longest Prefix Match
- Command References
- Review All the Key Topics
- VLAN Routing with Router 802.1Q Trunks
- VLAN Routing with Layer 3 Switch SVIs
- VLAN Routing with Layer 3 Switch Routed Ports
- Command References
- Review All the Key Topics
- Problem Isolation Using the ping Command
- Problem Isolation Using the traceroute Command
- Telnet and SSH
- Review All the Key Topics
- Comparing Dynamic Routing Protocol Features
- OSPF Concepts and Operation
- OSPF Areas and LSAs
- Review All the Key Topics
- Implementing Single-Area OSPFv2
- Using OSPFv2 Interface Subcommands
- Additional OSPFv2 Features
- Command References
- Review All the Key Topics
- OSPF Network Types
- OSPF Neighbor Relationships
- Command References
- Review All the Key Topics
- Introduction to IPv6
- IPv6 Addressing Formats and Conventions
- Review All the Key Topics
- Global Unicast Addressing Concepts
- Unique Local Unicast Addresses
- Review All the Key Topics
- Implementing Unicast IPv6 Addresses on Routers
- Special Addresses Used by Routers
- Command References
- Review All the Key Topics
- Connected and Local IPv6 Routes
- Static IPv6 Routes
- The Neighbor Discovery Protocol
- Command References
- Review All the Key Topics
- Comparing Wired and Wireless Networks
- Wireless LAN Topologies
- Other Wireless Topologies
- RF Overview
- Review All the Key Topics
- Autonomous AP Architecture
- Cloud-based AP Architecture
- Split-MAC Architectures
- Comparing Wireless LAN Controller Deployments
- Review All the Key Topics
- Anatomy of a Secure Connection
- Wireless Client Authentication Methods
- Wireless Privacy and Integrity Methods
- WPA, WPA2, and WPA3
- Lesson Review
- Review All the Key Topics
- Connecting a Cisco AP
- Accessing a Cisco WLC
- Connecting a Cisco WLC
- Configuring a WLAN
- Review All the Key Topics
- IPv4 Address Types
- Bandwidth and Clock Rate on Serial Interfaces
- Using traceroute to Isolate the Problem to Two Routers
- Troubleshooting Static IPv6 Routes
- Default Routes with SLAAC on Router Interfaces
- Analyzing Collision Domains and Broadcast Domains
- Analyzing Campus LAN Topologies
- Analyzing LAN Physical Standard Choices
- Choosing the Mask(s) to Meet Requirements
- Finding All Subnet IDs
- Mask Design Practice Problems
- Practice Finding All Subnet IDs
- VLSM Concepts and Configuration
- Finding VLSM Overlaps
- Adding a New Subnet to an Existing VLSM Design
- Implementing STP
- Implementing Optional STP Features
- Implementing RSTP
- Command References
- Troubleshooting STP
- Troubleshooting Layer 2 EtherChannel
- Analyzing the Switch Data Plane Forwarding
- Troubleshooting VLANs and VLAN Trunks
- Perspectives on Troubleshooting Routing Protocol Problems
- Interfaces Enabled with a Routing Protocol
- Neighbor Relationships
- Command References
- CCNA 200-301 Exam Topic Order
- Course Lesson Order Versus CCNA 200-301 Exam Topics
- About Cisco Certifications and CCNA
- Course Organization, Lessons, and Appendixes
- TCP/IP Layer 4 Protocols: TCP and UDP
- TCP/IP Applications
- Review All the Key Topics
- IPv4 Access Control List Basics
- Standard Numbered IPv4 ACLs
- Practice Applying Standard IP ACLs
- Command References
- Review All the Key Topics
- Extended Numbered IP Access Control Lists
- Named ACLs and ACL Editing
- Command References
- Review All the Key Topics
- Security Terminology
- Common Security Threats
- Controlling and Monitoring User Access
- Developing a Security Program to Educate Users
- Review All the Key Topics
- Securing IOS Passwords
- Firewalls and Intrusion Prevention Systems
- Command References
- Review All the Key Topics
- Port Security Concepts and Configuration
- Port Security Violation Modes
- Command References
- Review All the Key Topics
- Dynamic Host Configuration Protocol
- Identifying Host IPv4 Settings
- Command References
- Review All the Key Topics
- DHCP Snooping
- Dynamic ARP Inspection
- Command References
- Review All the Key Topics
- System Message Logging (Syslog)
- Network Time Protocol (NTP)
- Analyzing Topology Using CDP and LLDP
- Command References
- Review All the Key Topics
- Perspectives on IPv4 Address Scalability
- Network Address Translation Concepts
- NAT Configuration and Troubleshooting
- Command References
- Review All the Key Topics
- Introduction to QoS
- Classification and Marking
- Queuing
- Shaping and Policing
- Congestion Avoidance
- Review All the Key Topics
- First Hop Redundancy Protocol
- Simple Network Management Protocol
- FTP and TFTP
- Command References
- Review All the Key Topics
- Analyzing Campus LAN Topologies
- Small Office/Home Office
- Power over Ethernet (PoE)
- Review All the Key Topics
- Metro Ethernet
- Multiprotocol Label Switching (MPLS)
- Internet VPNs
- Review All the Key Topics
- Server Virtualization
- Cloud Computing Services
- WAN Traffic Paths to Reach Cloud Services
- Review All the Key Topics
- SDN and Controller-Based Networks
- Examples of Network Programmability and SDN
- Comparing Traditional Versus Controller-Based Networks
- Review All the Key Topics
- SDA Fabric, Underlay, and Overlay
- DNA Center and SDA Operation
- DNA Center as a Network Management Platform
- Review All the Key Topics
- REST-Based APIs
- Data Serialization and JSON
- Review All the Key Topics
- Device Configuration Challenges and Solutions
- Ansible, Puppet, and Chef Basics
- Review All the Key Topics
- Cisco Device Hardening
- Implementing DHCP
- Troubleshooting with IPv4 ACLs
- Implementing HSRP
- Gateway Load Balancing Protocol (GLBP)
- Implementing Simple Network Management Protocol
- Analyzing LAN Physical Standard Choices
- Metro Ethernet
- MPLS VPNs
- CCNA 200-301 Exam Topic Order
- Course Lessons, with Exam Topics Covered in Each
- Managing Cisco IOS Images and Upgrades
- Password Recovery
- Managing Configuration Files
- Command References
| What are the prerequisites for this exam? | There is no formal requirements for taking the new exam. However, Cisco recommends that the candidate should have:
|
|---|---|
| What is the exam registration fee? | USD 300 |
| Where do I take the exam? | Pearson VUE |
| What is the format of the exam? |
|
| How many questions are asked in the exam? | The exam contains 100-120 questions. |
| What is the duration of the exam? | 120 minutes |
| What is the passing score? | 800-850 (on a scale of 300-1000) |
| What is the exam's retake policy? | The policies for retaking exams are as follows:
|
| Where can I find more information about this exam? | To know more about the 200-301, click here. |
| What are the career opportunities after passing this exam? |
|
×
